Landscape irrigation systems are often installed incorrectly or even non-existent. Repairing an inadequately established drip irrigation system is a very common necessity for most landscaping projects. How to set up a drip irrigation system suitable for the garden. In the upcoming paragraphs, there are some steps given that help you in setting up an irrigation system.
Precise plant design:
The irrigation system depends on the arrangement of the plants. Proper irrigation design works best when the planting design is made with irrigation design in mind. Plantations are chosen not only for their shape, form, and structure but also for the amount of sunlight they prefer. The concept of planting area determines how the irrigation system is irrigated. However, if you have any questions regarding this then you can contact professionals available at https://www.mvi.farm/ to get the best irrigation solutions.
Image Source: Google
Create irrigation zones based on planting:
Zones allow irrigation valves to drain water of different durations and frequencies. In this way, irrigation stations or separate valves are designed for specific areas. Examples of zones are front yard, backyard, tree, front bush, northern bush, local vegetation area, and so on. Note that each of these areas requires a different amount of water. Some need to be watered daily, others only once a week.
Find irrigation controller:
The valve shall be automatic and controlled by the irrigation controller. The controller must have as many stations available as valves. The controller can be placed indoors or outdoors and in any case connected to a power source. Control wires run from the controller location to each valve, so it's not important to have a valve near the controller.